Puff Paste
Product introduction:
- It is an acrylic polymer mixtures paste, which is used for Puff printing.
- It is good operability without screen blocking. Strong 3D effect and excellent adhesion.
- Suggest applying for cotton fabrics or cotton blends.
Technical Specifications
- Appearance:Light yellow Paste
- Iconicity: Anionic
- PH: 7.0-7.5
Product Model
|
W-1000 Puff Paste (Medium Temp.)
|
RT821 Puff Paste (High Temp.)
|
Application
- Suggest using 43T-47T mesh.
- Normally mix rubber paste (Puff Paste: Rubber Paste=4:6) then directly print 3 times. After drying, press 15 seconds at 140℃/160℃
- Please remember to do curing at temperature 140℃ for 3 minutes and put for natural drying 24 hours before doing the wash testing.
Product Storage
- In original containers Well-closed. 5℃(41℉)~40℃(104℉)
- Storage time：12 months
Product Packaging
- 20/50 kg/barrel
R&T guarantees the products qualities. However all the recommendations are done without any responsibility because R&T cannot control the conditions of the applications.
