Product introduction
- It is a ready paste to mix pigment color to print directly.
- It is not allowed to mix too much water (below 20%) which will reduce the viscosity to cause the wash fastness problems.
- Suggest applying for cotton fabrics or cotton blends.
Technical Specifications
- Appearance: White/Light yellow Liquid
- Iconicity: Anionic
- PH: 7.0-7.5
Product Model
|
RT406 Pigment Ready Paste |
Application
- RT406 Pigment Ready Paste
- Normally pls mix pigment color with 5%-7% together with adding the fixer RT1999 2% to print 1 time with 2 strokes.
- Please remember to do curing at temperature 150℃-160℃ for 2 minutes and put for natural drying 24 hours before doing the wash testing.
Product Storage
- In original containers Well-closed. 5℃(41℉)~40℃(104℉)
- Storage time：12 months
R&T guarantees the products qualities. However all the recommendations are done without any responsibility because R&T cannot control the conditions of the applications.
